538
103
0
While the spring leg disc harrow is doing much more affective work in breaking/ crushing and mixing than the disc harrows known of the machine construction and independent disc structure; each disc works separately due to independent bearing. Damages to occur on the chassis and the cracks due to back and forth motion of the discs for encountering an obstacle due to each self – springing leg, damages and cracks are eliminated. It is less affected by the roughness of surface of the plantation/land. It almost never damages the leveling of the land. In addition the roller connected/ attached to the chassis presses the soil at the same time that the soil is lifted by the discs therefore the moisture loss after the process is minimized. Machine can work easily on the heavily damp/ moistened soils.
Disc installation and structure allow much operation with less fuel.
Bearings are manufactured from the steel and protected by double bearings and seals.
Leveling of the field is not disrupted during the cultivation by chocks. It minimizes the disc breakage and abrasion by absorbing the loads on the discs.
Machines with various work widths are designed for hanger, pull and transport. This allows you to choose the most appropriate model for your circumstances.
Disc may be manufactured with sizes of 510, 560 mm and plane and notched.
Traffic kit creates higher visibility with better security.