Trailed and Mounted V Type Offset Disc Harrow ACD

V type trailed and mounted offset disc harrows are a kind of soil cultivation machine which is used to prepare seed bed by breaking the clods after the pulley and mixing the soil.

Operations such as dissecting the plant residues and weeds and breaking the duff layer may be performed with V type towed and loop offset disc harrows. The most significant superiority from secondary soil cultivation tools is being usable within wide humidity limits of the soil.

ADDITIONAL GUIDE DISC
ADDITIONAL GUIDE DISC

There is an additional guide disc to close the furrow hole and prevents hole formation.

DISC HARROW PULLEYS
DISC HARROW PULLEYS

The pulley system which is manufactured from steel pipe and platina and so breakage was prevented.

SCRAPERS
SCRAPERS

The scraper system present on each disc which prevents grass and soil sticking and cleans the disc.

CURVE ADJUSTING PROFILE
CURVE ADJUSTING PROFILE

It enables to adjust the battery curve easily.

CURVE FIXING
CURVE FIXING

A spring pin assembly which enables the battery curve to be fixed during the operation.

THREE POINT LINKAGE
THREE POINT LINKAGE

It has a feature to be trailer by removing a pin.

DISC HARROW BEARING
DISC HARROW BEARING

Double ball bearing, double dust seals, ring manufactured from forged steel and long lasting bearing with double grease nipple.

SIZE AND FORM OF THE DISC
SIZE AND FORM OF THE DISC

Discs may be manufactured with sizes of 460 and 510 mm and plane and notched.

CHASSIS WITH DIFFERENT THICKNESSES
CHASSIS WITH DIFFERENT THICKNESSES

There are light and heavy chassis options on our machine upon request.

CURVE ADJUSTING ASSEMBLY WITH LIFT
CURVE ADJUSTING ASSEMBLY WITH LIFT

The curve angles may be adjusted with the hydraulic lift without stepping out the tractor.

Materials used in offset disc harrows are inspected completely before manufacturing step and prepared for manufacturing after passing along the test step and quality materials are used.


Thanks to its design, the adjustments are simple and it is a very easy to operate machine.


This machine may be used as both trailed and hydraulic.


Two chassis types may be manufactured as normal and big chassis upon request.


As well as boron steels with a diameter of 460 mm, European and domestic discs with diameter of 510 mm may be installed on our machines.


Automated curve assembly has an operation feature on desired angle with spring lock system.


Upon request, an curve adjusting assembly may be installed to adjust the curve without getting off the tractor.


There are scrapers as sharp as the disc to clean the stuck soil on each disc during the operation.


There is a discharge lubricator to visualize the discharge of the oil which is filled in the bearing together with the double seal and double bearing in our bearings.


You may cultivate your field without loosing time and opening a furrow pit with the guide disc.


Pulleys are manufactured from the steel and their breakage was prevented because of the stone or different reasons in the field.


 

Specifications Unit AÇD 20 AÇD 24 AÇD 28 AÇD 32 AÇD 36 AÇD 40
Disc Number  Pcs 20 24 28 32 36 40
Disc Diameter Mm 460 x 3,5
Dist. Between Disc Cm 18
No.Of Beds On Crank Pcs 8 12
Working Width (A) Cm 180 216 252 288 324 360
Total Width (B) Cm 223 258 293 328 363 398
Total Lenght (C) Cm 147
Total Height (D) Cm 205
Frame Size Mm 100 x 80 x 5 100 x 100 x 6
Weight 460 mm Disc Kg 610 660 710 765-935 985 1035
Weight 510 mm Disc Kg 870 1050 1100 820-985 1040 1095
Min. Hp Hp 50-55 55-60 60-70 70-80 80-90 90-100